How to pair the aircraft and remote controller

Occasionally, your remote controller and aircraft can become unpaired. If the controller’s LCD screen reads, “Connect your aircraft,” and your aircraft’s rear LEDs are displaying a fast, flashing yellow, you will need to rebind your remote controller to the aircraft. You can rebind the aircraft using either the remote controller or the Starlink app.

To rebind your aircraft with the remote controller using the device buttons:

  1. Turn off the remote controller.
    remote power button
  2. Turn on the aircraft.
    drone power button
  3. Press and hold the RC Binding button on the side of the aircraft (shown below) for about 3 seconds. The binding indicator next to the RC Binding button will slowly flash green indicating the aircraft is ready to rebind.
    drone binding button
  4. Push and hold the Powerpowerbutton_icon and the Home go-home-btn-icon buttons simultaneously on the remote controller for a few seconds. The binding indicator will turn solid green when the binding is successful.
    rc_shortcut_power home

To rebind your aircraft and the remote controller using the Starlink app:

  1.  Turn on the remote controller.
    remote power button
  2. Turn on the aircraft.
    drone power button
  3. Connect your mobile device to the X‑Star Premium and start the Starlink app.
  4. Tap the rc signal icon icon, and then tap Bind. A 60-second timer starts.
    rc bind screenshot
  5. Within 60 seconds, press the RC Binding button (shown below) on the aircraft. Once pairing is complete, the app will display an “RC Binding Successful” message.
    drone binding button
NOTE: If rebinding the aircraft and remote controller repeatedly fails, please contact our customer support department.