How do I reconnect my remote controller?

Rebinding,or reconnecting, the aircraft and the remote controller is required only when one of the devices (e.g., aircraft, gimbal, or remote controller) has been replaced or if communication is lost for some reason.

There are two ways to rebind the aircraft and remote controller:

To rebind your X‑Star Premium aircraft and the remote controller using the remote control buttons

  1. Turn off the remote controller.
    remote power button
  2. Turn on the aircraft.
    drone power button
  3. Press and hold the RC Binding button (shown below) on the aircraft for about 3 seconds. The binding indicator next to the RC Binding button will slowly flash green indicating the aircraft is ready to rebind.
    drone binding button
  4. Push and hold the Power Power button and the Go Home btn-round-go-home   buttons simultaneously on the remote controller for a few seconds. The binding indicator will turn solid green when the binding is successful.
    rc_shortcut_power home
NOTE: If rebinding the aircraft and remote controller continuously fails, please contact our customer support department.
  1. Turn on the remote controller.
    remote power button
  2. Turn on the aircraft.
    drone power button
  3. Connect your mobile device to the remote controller and start the Starlink app.
  4. Tap the Remote Controller icon, and then tap Bind. A 60-second timer starts.
    bind screenshot
  5. Within 60 seconds, press the RC Binding button (shown below) on the aircraft. Once the remote is bound to the aircraft the app will display an “RC Binding Successful” message.
    drone binding button
NOTE: If rebinding the aircraft and remote controller continuously fails, please contact our customer support department.