Understanding the Starlink app interface

Starlink App - FPV
ButtonDescription
Settings
Settings
Manage the flight control, remote controller, video link, aircraft battery, gimbal, and general settings.
Remote Controller Signal
Remote Controller Signal
Displays the strength of the remote controller signal. Tap this button to open the remote controller settings.
Video Link Signal
Video Link Signal"
Displays the signal strength of the Wi‑Fi Video Link (X‑Star) or HD video streaming (X‑Star Premium) between the aircraft and the remote controller. Tap this icon to open the video link settings.
Advanced Camera Settings
Advanced Camera Settings
Access photo settings, video settings ), and camera settings
Camera Settings
Camera Settings
Choose automatic or manual settings for ISO, shutter speed, and EV.
Record Video
Record Video
Record a video. Tap this button again to stop recording. Video Settings are available in.
Camera Shutter
Camera Shutter
Take a photo. Photo settings are available in. Before taking a photo, select a shooting mode (Single Shot, Burst Shooting, AEB, or Time Lapse) from Photo Settings. When you choose a different shooting mode, this button changes in appearance.
Pitch Control
Pitch Control
Control the camera pitch movement. You will see a camera pitch angle indicator in the upper right corner of this button
Map ViewIn the FPV interface you will see a smaller split screen at the bottom left which displays a map of the surrounding area. Tap this screen to switch to the map view.
Distance
Distance
The horizontal distance between the aircraft and the home point.
Altitude
Altitude
The altitude of the aircraft relative to the home point level.
Flight Speed
Flight Speed"
The current flying speed of the aircraft.
Flight Status
Flight Status
The arrow indicates the tilt angle of the aircraft’s nose.
The colored ring indicates the current battery level of the aircraft. The green bar is present when there is abundant battery. The yellow bar indicates Low Battery and you should let your aircraft Go Home. The red bar means Critical Low Battery and the aircraft will land onsite.
Remaining Flight Time
Remaining Flight Time
The remaining time for the aircraft to fly.
Battery Level
Battery Level
The current battery level of the aircraft.
Starpoint Positioning System
Starpoint Positioning System
The distance between the surface and the Starpoint Positioning System sensors. This button is highlighted only when the Starpoint Positioning System is in a working state.

Basic Settings:

ButtonDescription
Compass CalibrationInitialize a Compass Calibration.
Beginner ModeEnable or disables Beginner Mode. This mode has a fixed maximum flight altitude (30 meters), distance (100 meters), and speed (horizontal: 6 meters/s, ascent: 3 meters/s, descent: 1 meters/s). These limitations help to keep your flight safe.
Flight SpeedSet limits for the aircraft’s ascent, descent, and horizontal speed when Beginner Mode is disabled.
Altitude and Distance LimitSet a maximum altitude and a maximum distance for your flight when Beginner Mode is disabled to protect the aircraft from losing the signal or flying out of sight. When these limits are enabled, the aircraft cannot fly outside the preset boundaries under GPS mode. In non-GPS mode, the aircraft is only restricted to the preset altitude limit; the distance limit under non-GPS mode may vary depending on the regulations and laws in different areas and countries. In GPS mode, the maximum altitude is set to 120 meters and the maximum distance is set to 800 meters by default.
Go Home AltitudeSet a safe altitude for your aircraft to Go Home automatically in case of an emergency.
If you set the Go Home altitude to a certain value, the aircraft will adjust its altitude to this value before returning to the home point. The default Go Home altitude is 30 meters.

Advanced Settings:

ButtonDescription
Enable ATTI ModeActivate ATTI mode on the remote controller directly. This mode is disabled by default to prevent accidental disabling of GPS mode.
Front LED Indicator LightsTurn on or turn off the two red LED indicators at the front of the aircraft. These LEDs help you to identify the aircraft’s nose direction during flight.
Starpoint Positioning SystemEnable or disable the Starpoint Positioning System.
Flight Data RecorderTap Format to clear all of your flight data.

The Remote Controller Settings screen gives you access to these settings: Gimbal Pitch Dial Sensitivity, RC Binding, RC Calibration, Command Stick Mode, and RC Language Setting.

TIP: You can also go to this screen by tapping on the General Information Bar.
ButtonDescription
Gimbal Pitch Dial SensitivityAdjust the sensitivity of the Gimbal Pitch Dial on the remote controller.
RC BindingBind the remote controller and aircraft.When you replace any devices (e.g., aircraft, gimbal, or remote controller), you must rebind the remote controller and the aircraft by using the RC Binding Button on the aircraft and this Bind button consecutively.
RC CalibrationCalibrate the remote controller including the Left Command Stick, Right Command Stick, and Gimbal Pitch Dial. You only need to calibrate your remote controller when using it for the first time or after your remote controller has been replaced.
Command Stick ModeChoose which command stick mode (Mode 1, 2, or 3) you prefer to control the aircraft.
RC Language Setting Choose your preferred language for use on the LCD Flight Information Panel.
starlink-screenshot-wifi-settings
  • You can rename the Wi‑Fi SSID and reset the password on this screen.
  • Do not use spaces in the SSID or Wi‑Fi password.
starlink-screenshot-aircraft-battery-settings

You can also enter this section by tapping icon-settings-aircraft-battery on the Aircraft Status Bar. This function allows you to view the current battery level and other information. Low Battery Warning and Critical Low Battery Warning settings are also available on this screen.

For your safety, the Low Battery Warning cannot be set below 25% which is the minimum battery level for Go Home. Also, the Critical Low Battery warning cannot be set below 12.5% which is the minimum battery level for landing.
starlink-screenshot-gimbal-settings
ButtonDescription
Gimbal ModeChoose a working mode for your gimbal:FPV Mode synchronizes the camera gimbal movements with the aircraft to provide a real-time video piloting experience from a first-person view.
Stabilized Mode enables stabilized camera tilting control for creative aerial photography.
Gimbal Calibration Make sure your aircraft is level and nothing is obstructing the gimbal’s range of motion. Tap Calibrate to start an automatic calibration of the gimbal. This helps to keep the gimbal level and steady for smooth photographing and filming.
Adjust Gimbal Roll You can adjust the gimbal roll slightly while watching the camera view to find the best angle for your photography.
Default Gimbal AngleThe gimbal angle is set to 0° by default. You can set the gimbal angle between 0° and 90°. Use this shortcut to change the gimbal tilt angle:

Tap Forward to face the camera forward horizontally.
Tap Default and the gimbal will come back to the default angle you set
Tap Downward to face the camera downward vertically.
starlink-general-settings
ButtonDescription
Parameter UnitsChoose Imperial or Metric as your preferred unit system.
Voice PromptEnable or disable the voice prompt.
TutorialDisplay or hide tips that appear before your operation.
starlink-camera-settings
ButtonDescription
ModeChoose between single shot, burst mode, or time lapse.
SizeChange the picture ratio to 4:3 or 16:9.
FormatChoose between JPG, DNG, or JPG+DNG.
StyleShoot photos in landscape, soft, or custom.
WB Set the white balance to auto, sunny, cloudy, incandescent, neon, or custom.
ColorChange photo colors to vivid, black and white, art, film, beach, dream, classic, or nostalgia.
Starlink Video Settings
ButtonDescription
ResolutionChoose 4K/30fps, 1080p/120fps, or 720p/240fps.
StandardChoose NTSC or PAL.
FormatChoose MOV or MP4.
StyleShoot films in standard, landscape, or soft modes.
WBSet the white balance to sunny, cloudy, incandescent, neon, or custom.
ColorChange the video color to vivid, B&W, art, film, beach, dream, classic, and nostalgia.