Bug fixes and optimizations

• Optimized metadata information in photos.

• Optimized image transmission logic to reduce disconnection issues.

• Optimized aircraft IMU performace.

• Fixed RTMP streaming issue.

• Fixed issues where pictures were not save or saved out of order when using HDR mode.

• Fixed occasional mission upload failures.

• Fixed other known issues.

Notes

• Android system V1.3.9.16 is only for EVO II V3

• To fully utilize all the new features in V3.1.117 Autel Explorer app, it's important to update your EVO II V3 firmware to V1.2.7 before flying.

Resource

• Livedeck II Firmware:https://www.autelrobotics.com/doc/livedeck_ii_firmware

• V3 Smart Controller Android System:https://www.autelrobotics.com/download/559.html

• Autel Explorer App: https://www.autelrobotics.com/download/27

• EVO II V3 Firmware: https://www.autelrobotics.com/download/543.html

• EVO II V3 Firmware Version Table: https://www.autelrobotics.com/download/544.html

Update Method & Steps:

• OTA Update:

1. Please ensure that the internet connection remains stable throughout the process.

2. Open the Explorer app and tap the settings icon in the camera view.

3. Go to General, then select Software Update, and tap on Android System.

4. Click on Start Updating.

5. The update process should take approximately 15 minutes to complete.

6. Once the update is finished, the controller will automatically power cycle.

• Manual Update:

1. Begin by downloading the Android System zip file.

2. Transfer the downloaded file onto an SD card.

3. Insert the SD card into the Smart Controller. If needed, you can utilize a USB converter for this step.

4. Navigate to Settings > General > Software Update > Android System.

5. Select the option for USB flash disk update.

6. Choose the file from the SD card and initiate the manual update process.

What's New

New Features

• Added Remote ID function in China

• Added Pairing method: Double click battery power button to enter pairing mode

Bug fixes and optimizations

• Optimized video transmission feed performance

• Optimized No-fly zone function

• Optimized Remote ID function

• Optimized HDMI function

• Fixed GPS update error issue

• Fixed other known issues.

Notes

• Android system V1.3.9.15 is only for EVO II V3

• To fully utilize all the new features in V3.1.107 Autel Explorer app, it's important to update your EVO II V3 firmware to V1.1.78 before flying.

Resource

• Livedeck II Firmware:https://www.autelrobotics.com/doc/livedeck_ii_firmware

• V3 Smart Controller Android System:https://www.autelrobotics.com/download/572.html

• Autel Explorer App: https://www.autelrobotics.com/download/113

• EVO II V3 Firmware: https://www.autelrobotics.com/download/547.html

• EVO II V3 Firmware Version Table: https://www.autelrobotics.com/download/548.html

Update Method & Steps:

• OTA Update:

1. Please ensure that the internet connection remains stable throughout the process.

2. Open the Explorer app and tap the settings icon in the camera view.

3. Go to General, then select Software Update, and tap on Android System.

4. Click on Start Updating.

5. The update process should take approximately 15 minutes to complete.

6. Once the update is finished, the controller will automatically power cycle.

• Manual Update:

1. Begin by downloading the Android System zip file.

2. Transfer the downloaded file onto an SD card.

3. Insert the SD card into the Smart Controller. If needed, you can utilize a USB converter for this step.

4. Navigate to Settings > General > Software Update > Android System.

5. Select the option for USB flash disk update.

6. Choose the file from the SD card and initiate the manual update process.