How To Update/Roll Back Firmware With SD Card?

Click here for tutorial video

How To Update/Roll Back Firmware With SD Card?

• Before update/rollback, make sure the drone's battery level is at least 25%.

• Format the SD card, and copy the installation package to the card.

• Power on the drone and wait for 2 minutes. Then install the SD card into the slot.

• The indicators on the arms are flashing, indicating that the update/rollback has started.

• Wait for 15 minutes.

• If the indicators are steady on, the update/rollback is complete.

• Wait for 2 minutes and power on the drone again.

• Double click the power button.

• Link and check the update/rollback is successful or not